If you find yourself in need to cut solid steel metal, the Hobart Airforce 700i Plasma Cutter makes it simple for you to slice even the hardest metal out there. It doesn’t matter if its stainless steel, aluminum, copper, brass or any other conductive metals surely, it will slice like butter.
The Hobart Airforce 700i Plasma Cutter will cut through with 5/8 inch thick steel or up to 7/8 inch of mild steel depending on the type of metals. If you think that cutting hard steel is a tough job, not anymore with the Hobart Airforce 700i Plasma Cutter.
The Hobart Airforce 700i Plasma Cutter Review gives you insight of the unit with its key features, advantages and performance. The purpose of it is to help you decide if it’s the right plasma cutter for your needs.
“Like I said above, small compact and very easy to use. I cut 1-inch steel like it was nothing, could not believe it.” By jerri reckling March 6, 2013 Verified Purchase
>>Click Here to check the price and discover what people are saying about this amazing tool.
Advantages Of Plasma Cutter Over Oxy/Fuel
Plasma cutters cut any type of conductive metal unlike Oxy/Fuel. Why wait for long and tiring cut using Oxy/Fuel while you can do it fast with the Hobart Airforce 700i Plasma Cutter. For precise cutting, nothing beats the plasma cutter. It provides thinner kerf and less slag to clean up that saves you more time for doing more of your task.
The Hobart Airforce 700i Plasma Cutter produces smaller heat affected area that resulting in a perfect shape cut every time. It doesn’t require the time consuming gas pressure settings and flame tuning in which the Oxy/Fuel needed. You can cut instantly with plasma cutter unlike the Oxy/Fuel that needs to preheat the metal before cutting it.
Built For Tough Work
The Hobart Airforce 700i Plasma Cutter is design to withstand tough working environment so that you can use it not only for light but also for heavy industrial applications. The Hobart Airforce 700i provides a rated duty cycle of 35-percent at 104 degrees Fahrenheit so that it never affects its performance even at extreme temperature.
In some areas where the voltage source is unstable the Hobart Airforce 700i Plasma Cutter can still work in its best. It provides peak performance power though the input voltage varied. With its +/- 15% Line Voltage Correction the Hobart Airforce 700i Plasma Cutter works accurately steady for precise cutting.
New Portable Design
The all new Hobart Airforce 700i Plasma Cutter design comes from its prior model AirForce 625. It is presented in a compact design having half of its weight with only 31-pounds so that you can easily bring it anywhere where cutting is necessity.
For Powerful Cutting
The Hobart Airforce 700i Plasma Cutter is powered by Engine Driven Welder which is capable of cutting thick steel from 3/8” to 5/8” or up to 7/8” thick mild steel. It runs with a 240-volts generator power outlet with at least 8KW or more for full operations.
More Features Ahead
The Hobart Airforce 700i Plasma Cutter brings more features on the table for total versatility. For added comfort the all new HP-70 hand held torch gives you a perfect grip without tiring even for long hours of work.
After every cutting the torch and tip needs to cool down with the Post-Flow Air Cooling so that it extends the life of electrode and the replaceable tip that saves you money and time as well.
To get rid of the dust and debris on the unit the Fan-On-Demand takes care of it. To prevent the internal components of the unit from damaging, the Wind Tunnel Technology eliminates the dust and particles.
For more convenient transporting there’s the cable management strap that secures the torch, cable and power cord.
Working with long extension cords makes it comfortable to anyone, right? However, there’s a voltage drop to be consider. The Power Factor Correction keeps the voltage drop to minimum so that it doesn’t affect its operation.
Hobart Airforce 700i Plasma Cutter Review
The Hobart Airforce 700i Plasma Cutter Review receives an excellent appraisal of 4.5/5 stars at Amazon.com that proves its amazing performance. The following reviews are written by people who actually bought and use it in real world applications.
Top Quality Excellent Performance
“Having been impressed with the overall quality of Hobart MIG welders, I purchased the 700i and have found it equally impressive in its overall construction and performance. The new inverter IGBT technology makes for a physically small package, but impressive cutting performance. Prior experience was with a Thermodyne unit, which worked fine, but I really like the 700i unit.”
“Incredible!…small and lightweight….very precise cuts, Perfect”
“I bought this with the intention of maintaining my farm equipment, so I wanted a plasma torch that had some teeth to it. And I was not disappointed. It is rated to cut 5/8 inch metal, so when I got it out of the box and got it hooked up, I had a 1-inch thick piece of steel plate that I tried it out on. And to my surprise it did the job.”
Not CNC Compatible
“As the title says Hobart does not offer a CNC torch for any of their models. If this is a deciding factor in your purchase you better off with a Miller or equivalent. If this does not matter to you, then this plasma cutter is a beast of a machine and works wonderfully. Cuts light a hot knife through butter!” >>Click here to read more reviews.
The Hobart Airforce 700i Plasma Cutter delivers an excellent performance as it is proven by customers who are using it. Feature wise, you can never short of it. However, if you’re looking for a CNC compatible this is not the one for you. If a powerful, precise and portable cutter is what you’re craving for you can never go wrong with it.
“I went to 5 different stores in my area to purchase this product and Amazon was the cheapest by 100.00+ dollars. Quite happy with this little cutter, it was smaller and stronger than I expected it to be. Five Stars!” >>Click Here to get it at its Lowest Price!